A49 Class G Integrated Stereo Amplifier
Arcam’s A49 integrated amplifier represents the pinnacle of Arcam’s audio engineering. We set out to incorporate everything we have learnt in almost 40 years to deliver an amplifier that will set new standards and provide class leading sound quality for the best possible reproduction of your music.
Arcam’s highest performing amplification ever:
- Fully flexible stereo amplifier range
- Power amp can be configured for multiple modes
- Class G amplification with 50W of class A operation
- On board PSU for rSeries products
- CR902 system remote control (A49, C49)
- Phono input configurable for line/MM (A49, C49)
- Large ergonomically designed aluminium knob
- Low power 0.5W standby
Drawing on the many years of amplifier design experience at Arcam, the A49 uses the best quality components and engineering practice to produce a product that will give many years of musical pleasure and reliable service.
With a class G amplifier, toroidal based power supply, acoustically damped chassis, paralleled transistor output stages and exceptionally low levels of distortion and noise the A49 is capable of reproducing music with all its original authority and detail. The A49 features dual mono volume controls and a balanced signal path all the way though the product together with distortion nulling input multiplexers. Rest assured you will be hearing the music just as the artist intended.
The A49 has been designed to leapfrog the competition with a massive 200 watts per channel into 8 ohms and 400 into 4 ohms. It delivers 50 watts in pure class A mode while allowing for huge extra power reserves from our latest generation class G topology that is both clever and efficient. During normal operation, distortion is measured in less than one part per million so that this massive power is deliver with total control and finesse.
There have been great strides made in improving audio sources and loudspeakers in recent years and the time is right to match them in the field of amplifier design. This ground breaking amplifier is a must audition amplifier for music lovers who understand that power is nothing without control.
Product Details- Arcam’s highest performing amplification ever
- Fully flexible stereo amplifier range
- Power amp can be configured for multiple modes
- Class G amplification with 50W of class A operation
- On board PSU for rSeries products
- CR902 system remote control (A49, C49)
- Phono input configurable for line/MM (A49, C49)
- Large ergonomically designed aluminium knob
- Low power 0.5W standby
- Dimensions & Weights
- W x D (inc. speaker terminals) x H (inc. feet) - 433 x 425 x 171mm
- Weight (net) - 19.7kg
- Weight (packed) - 21.4kg
- Continuous power output, per channel, 8Ω
- Both channels driven, 8Ω,20Hz-20kHz, 0.2% THD - 200W
- Single, 4Ω, at 1kHz - 400W
- Inputs - Phono (MM) cartridge
- Input sensitivity at 1kHz - 5mV
- Input impedance - 47kΩ +100pF
- Frequency response (ref. RIAA curve) - 20Hz-20kHz +/- 1dB
- Signal/noise ratio (Awtd) 50W, ref. 5mV input - 80dB
- Overload margin, 5mV at 1kHz - 20dB
- Power consumption (standby) - <0.5W
- Nominal sensitivity - 1V (RCA), 2V (XLR)
- Input impedance - 10kΩ
- Maximum input - 8V (RCA), 15V (XLR)
- Frequency response 20Hz-20kHz +/- 0.05dB
- Signal/noise ratio (Awtd) 50W, ref 1V/2V input - 105dB
- Nominal output level - 1.15V (RCA), 2.3V (XLR)
- Output impedance - 47Ω (RCA), 200Ω (XLR)
- Headphones output
- Maximum output level into 600Ω - 4Vrms
- Output impedance - 1Ω
- Load range - 16Ω-2kΩ
Refund Policy
EXCHANGE
Every product that you order from Radar Audio Company online shop is taking full care by us. You may return any items in its original condition for an exchange due to below reasons:
- The goods received are not the ones that you ordered;
- If it is discovered that the product is severely damaged or has operation problems after opening or when it remained unopened.
- Customer must contact our Customer Service Department within seven working days of receipt of the goods for replacement.
- The goods must be accompanied with our official invoice, original package, product barcode, accessories, manuals and warranty card without filled.
- All exchanged products will be inspected by our service center before replacement. Otherwise, we will not be able to identify and process the replacement procedure.
- The returned product must be intact, not involving human damage, not being repaired, free from scratches and water damage.
NOT APPLICABLE FOR EXCHANGE
- Invalid product code and serial number of the product and warranty card.
- Product not sold on Radar Audio online shop.
- Failure to follow instructions supplied with the product.
- Any damages or defects caused by, including but not limited to external pressure, impact damage, dropped, misuse, humidity, water damage, other consequences of easy access, or missing parts.
- Any damages or defects that occur in/on outer surface of the product that result from normal wear and tear under ordinary use.
- Any damages or defects caused by human errors or unexpected factors including but not limited to handling, extrusion, bumps, scratches, impacts, exposure to high temperature, improper input voltage, corrosion, water, fire, accidents etc.
- Any damages or defects caused by any accident, act of natural, physical damage or malfunction, abuse, misuse, natural or personal disaster, or any unauthorized disassembly, repair or alteration and modification.
REFUND
- In case of out of stock, refund will take 3-7 working days to process.
- Prices are subject to change without prior notice and all orders are subject to Company’s acceptance at its sole discretion and stock availability.
- If any dispute arises, Radar Audio Company determination shall be final.
- Where these terms and conditions are available in Chinese, the English version is the governing version and shall prevail whenever there is a discrepancy between the two versions.
QUESTIONS
- Email service@radaraudio.com
- Phone +852 2418 2668