Evergreen Analog Interconnect Cable
Analog-Audio Interconnect Cable named after the Evergreen Bridge that connects Seattle, Washington (USA) to the Bellevue area across Lake Washington.In all Bridges & Falls, you’ll find better metals and more sophisticated technologies — including Air-Tube insulation, Dielectric-Bias System, and Noise-Dissipation System — at lower prices than ever before.
Note: All cables in our Bridges & Falls Series place their left and right channels in a single jacket, and feature our Asymmetrical Double-Balanced geometry with separate high-quality positive and negative conductors. This design allows for a thin, flexible, and uniquely versatile high-performance cable that can be terminated with a variety of today’s connections, including 3.5mm (male or female), DIN, and RCA. Do keep in mind, however, that, by necessity, the plugs on Bridges & Falls cables are fairly close together. If the L and R inputs of your components are more than 3″ (7.6cm) apart, please consider models from our Rivers or Elements Series.
Asymmetrical Double-Balanced Geometry
Purpose designed for single-ended applications, Asymmetrical Double-Balanced Geometry offers a relatively lower impedance on the ground for a richer, and more dynamic experience. While many single-ended cable designs use a single path for both the ground and the shield, Double-Balanced designs separate the two for cleaner, quieter performance.
Solid Long-Grain Copper (LGC) Conductors
Solid Long-Grain Copper (LGC) allows a smoother and clearer sound than cables using regular OFHC (Oxygen-Free High-Conductivity) copper. Solid conductors prevent strand interaction, a major source of distortion. The surface quality is critical because a conductor can be considered as a rail-guide for both the electric fields within a conductor, and for the magnetic fields outside the conductor. LGC has fewer oxides within the conducting material, less impurities, less grain boundaries, and definitively better performance.
Foamed-Polyethylene Insulation
Any solid material adjacent to a conductor is actually part of an imperfect circuit. Wire insulation and circuit board materials all absorb energy. Some of this energy is stored and then released as distortion. Because air absorbs next to no energy and Polyethylene is low-loss and has a benign distortion profile, Foamed-PE, with its high air content, causes much less of the out-of-focus effect common to other materials.
Metal-Layer Noise-Dissipation System
It's easy to accomplish 100% shield coverage. Preventing captured radio-frequency interference (RFI) from modulating the equipment's ground reference requires AQ's Noise-Dissipation. Traditional shield systems typically absorb and then drain noise/RF energy to component ground, modulating and distorting the critical "reference" ground plane, which in turn causes a distortion of the signal. Noise-Dissipation "shields the shield," absorbing and reflecting most of this noise/RF energy before it reaches the layer attached to ground.
Cold-Welded, Gold-Plated Terminations
This plug design allows for a connection devoid of solder, which is a common source of distortion. Instead of solder, the process employs a high-pressure technique. Because the ground shells are stamped instead of machined, the metal used can be chosen for low distortion instead of machinability.
Available Lengths: 0.6m-20m
Refund Policy
EXCHANGE
Every product that you order from Radar Audio Company online shop is taking full care by us. You may return any items in its original condition for an exchange due to below reasons:
- The goods received are not the ones that you ordered;
- If it is discovered that the product is severely damaged or has operation problems after opening or when it remained unopened.
- Customer must contact our Customer Service Department within seven working days of receipt of the goods for replacement.
- The goods must be accompanied with our official invoice, original package, product barcode, accessories, manuals and warranty card without filled.
- All exchanged products will be inspected by our service center before replacement. Otherwise, we will not be able to identify and process the replacement procedure.
- The returned product must be intact, not involving human damage, not being repaired, free from scratches and water damage.
NOT APPLICABLE FOR EXCHANGE
- Invalid product code and serial number of the product and warranty card.
- Product not sold on Radar Audio online shop.
- Failure to follow instructions supplied with the product.
- Any damages or defects caused by, including but not limited to external pressure, impact damage, dropped, misuse, humidity, water damage, other consequences of easy access, or missing parts.
- Any damages or defects that occur in/on outer surface of the product that result from normal wear and tear under ordinary use.
- Any damages or defects caused by human errors or unexpected factors including but not limited to handling, extrusion, bumps, scratches, impacts, exposure to high temperature, improper input voltage, corrosion, water, fire, accidents etc.
- Any damages or defects caused by any accident, act of natural, physical damage or malfunction, abuse, misuse, natural or personal disaster, or any unauthorized disassembly, repair or alteration and modification.
REFUND
- In case of out of stock, refund will take 3-7 working days to process.
- Prices are subject to change without prior notice and all orders are subject to Company’s acceptance at its sole discretion and stock availability.
- If any dispute arises, Radar Audio Company determination shall be final.
- Where these terms and conditions are available in Chinese, the English version is the governing version and shall prevail whenever there is a discrepancy between the two versions.
QUESTIONS
- Email service@radaraudio.com
- Phone +852 2418 2668