Cinnamon AES/EBU Cable
AES/EBU, developed jointly by the Audio Engineering Society and the European Broadcast Union, established a two-channel digital standard for interconnecting digital devices in the professional world. But, AES/EBU also has its application in the domestic environment as well. While AES/EBU can be single-ended, balanced, or optical, here we refer to the balanced-digital interconnect. Available Lengths: 0.75m-5m
Hard-Cell Foam Insulation
Hard-Cell Foam (HCF) Insulation ensures critical signal-pair geometry. Any solid material adjacent to a conductor is actually part of an imperfect circuit. Wire insulation and circuit board materials all absorb energy. Some of this energy is stored and then released as distortion. Hard-Cell Foam Insulation is similar to the Foamed-PE used in our more affordable Bridges & Falls cables, and is nitrogen-injected to create air pockets. Because nitrogen (like air) does not absorb energy and therefore does not release any energy from or into the conductor, distortion is reduced. In addition, the stiffness of the material allows the cable's conductors to maintain a stable relationship along the cable's full length, producing a stable impedance character and further minimizing distortion.
Solid 1.25% Silver Conductors For Improved Digital Performance
Solid conductors eliminate strand-interaction distortion and reduce jitter. Solid silver-plated conductors are excellent for very high-frequency applications, like HDMI audio. These signals, being such a high frequency, travel almost exclusively on the surface of the conductor. As the surface is made of high-purity silver, the performance is very close to that of a solid silver cable, but priced much closer to solid copper cable. This is an incredibly cost effective way of manufacturing very high-quality HDMI cables.
Cold-Welded, Gold-Plated Terminations
This plug design allows for a connection devoid of solder, which is a common source of distortion. Instead of solder, the process employs a high-pressure technique. Because the ground shells are stamped instead of machined, the metal used can be chosen for low distortion instead of machinability.
Carbon-Based 3-Layer Noise-Dissipation System (NDS)
It's easy to accomplish 100% shield coverage. Preventing captured Radio Frequency Interference (RFI) from modulating the equipment's ground reference requires AQ's Noise-Dissipation System (NDS). Traditional shield systems typically absorb and then drain noise/RF energy to component ground, modulating and distorting the critical "reference" ground plane, which in turn causes a distortion of the signal. NDS's alternating layers of metal and carbon-loaded synthetics "shield the shield," absorbing and reflecting most of this noise/RF energy before it reaches the layer attached to ground.
Foil + Silver-Plated Braid Shield
Refund Policy
EXCHANGE
Every product that you order from Radar Audio Company online shop is taking full care by us. You may return any items in its original condition for an exchange due to below reasons:
- The goods received are not the ones that you ordered;
- If it is discovered that the product is severely damaged or has operation problems after opening or when it remained unopened.
- Customer must contact our Customer Service Department within seven working days of receipt of the goods for replacement.
- The goods must be accompanied with our official invoice, original package, product barcode, accessories, manuals and warranty card without filled.
- All exchanged products will be inspected by our service center before replacement. Otherwise, we will not be able to identify and process the replacement procedure.
- The returned product must be intact, not involving human damage, not being repaired, free from scratches and water damage.
NOT APPLICABLE FOR EXCHANGE
- Invalid product code and serial number of the product and warranty card.
- Product not sold on Radar Audio online shop.
- Failure to follow instructions supplied with the product.
- Any damages or defects caused by, including but not limited to external pressure, impact damage, dropped, misuse, humidity, water damage, other consequences of easy access, or missing parts.
- Any damages or defects that occur in/on outer surface of the product that result from normal wear and tear under ordinary use.
- Any damages or defects caused by human errors or unexpected factors including but not limited to handling, extrusion, bumps, scratches, impacts, exposure to high temperature, improper input voltage, corrosion, water, fire, accidents etc.
- Any damages or defects caused by any accident, act of natural, physical damage or malfunction, abuse, misuse, natural or personal disaster, or any unauthorized disassembly, repair or alteration and modification.
REFUND
- In case of out of stock, refund will take 3-7 working days to process.
- Prices are subject to change without prior notice and all orders are subject to Company’s acceptance at its sole discretion and stock availability.
- If any dispute arises, Radar Audio Company determination shall be final.
- Where these terms and conditions are available in Chinese, the English version is the governing version and shall prevail whenever there is a discrepancy between the two versions.
QUESTIONS
- Email service@radaraudio.com
- Phone +852 2418 2668