Dragon Bass Speaker Cable
Product Reviews:
威達影音頻道 (Radar Audio YouTube Channel) |
Dragon BASS with GND is an ideal cable for the Bass and Midrange inputs of a BiWirable or TriWireable loudspeaker when used in combination with Dragon ZERO Full-Range cable on the treble input.
Zero: No Characteristic Impedance For Uncompressed Current Transfer
AudioQuest has always stated that all cables cause damage because the output is never as good as the input. However, by eliminating a speaker cable’s characteristic impedance, AQ’s ZERO Technology is an unprecedented step towards reducing that damage. The result is greater dynamic contrast, better audio transient response, and bass slam that are rendered seemingly without effort because the cable is not electrically restricting (strangling) the music.
Ground-Noise Dissipation (GND)
This extremely effective patented common-mode noise-rejection technology is deployed on the ground path in almost all AQ AC Power cables, in addition to in AQ Bass & Midrange model speaker cables. The effectiveness of GND compromises audio above 10,000Hz, preventing the dedicated Bass & Midrange cable from being ideal for Full-Range use.
Dragon Conductors: Solid Perfect-Surface Silver (PSS)
Perfect-Surface Technology applied to extreme-purity silver provides unprecedented clarity and dynamic contrast. Perfect-Surface Silver (PSS) is AudioQuest's highest-quality metal. Solid conductors prevent strand interaction, a major source of cable distortion. Extremely high-purity Perfect-Surface Silver minimizes distortion caused by the grain boundaries that exist within any metal conductor, nearly eliminating harshness and greatly increasing clarity compared to OFHC, OCC, 8N and other coppers.
Carbon-Based Linearized Noise-Dissipation System (NDS)
AQ’s comprehensive Linearized Noise-Dissipation System combines multiple shields and a carbon-based linearized resistive network that turns most of this noise into heat. By "linearized," we mean that the system is equally effective across extremely wide bandwidth, rather than at selected frequencies only, as is more common. The remaining bad energy is effectively drained away from the sensitive amplifier circuits via directionally controlled signal and shield conductors
72v Dielectric-Bias System with CARBON-Level Radio-Frequency Trap (DBS)
All insulation is also a dielectric whose electrical properties affect the integrity of the signal. When the insulation is unbiased, dielectric-involvement (absorption and non-linear release of energy back into the signal flow) causes different amounts of time delay (phase shift) for different frequencies and energy levels, which is a significant problem for very time-sensitive multi-octave audio. AudioQuest’s multi-patented DBS creates a strong, stable electrostatic field which saturates and polarizes (organizes) the molecules of the insulation. This minimizes the nonlinear time delays, resulting in clearer sound emerging from a “blacker” background. The inclusion of an RF Trap (a technology developed for AudioQuest’s Niagara Series of power products) in the DBS battery pack further reduces radio-frequency noise. The DBS battery packs will last for many years. A test button and LED allow for the occasional battery check.
Dragon Biwiring
When possible, running separate cables to the treble and bass “halves” of a speaker considerably reduces distortion. BiWiring keeps the large magnetic fields associated with bass energy out of the treble cable, allowing the delicate upper frequencies to travel a less magnetically disturbed path, like taking the waves out of the water when you swim. The Rocket models of AQ speaker cable have two autonomous internal constructions, facilitating proper BiWiring within a single cable. The Type models of AQ speaker cable can be doubled-up, using one for treble and one for bass. However, doubling-up AQ’s ZERO Technology cables can be less of an improvement because of ZERO’s unrestricted wide bandwidth – using two ZERO Full-Range cables can actually allow more RF energy into the amplifier, whereas using a BASS with GND Bass & Midrange cable in combination with a ZERO cable for Treble significantly reduces total RF Noise. The BASS cable’s patented Ground-Noise Dissipation (GND) drains RF energy away from the amplifier’s output. When properly implemented, BiWiring has always been a way to get better performance for the same or less money. With GND, the improvements from BiWiring are considerably more dramatic. Dragon BASS with GND is an ideal cable for the Bass and Midrange inputs of a BiWirable or TriWireable loudspeaker when used in combination with Dragon ZERO Full-Range cable on the treble input. Dragon ZERO can also be used with ThunderBird BASS or FireBird BASS as excellent cost-effective alternatives.
Mythical Creature Cold-Welded Terminations
Mythical Creature cables are Cold-Welded to AudioQuest’s extremely pure Red Copper Spades or Bananas. The bare copper is submerged (hung) in a vat of pure silver instead of being tumbled in a lower-grade solution. AudioQuest speaker breakouts and plug casings are not metal in order to not disrupt the signal’s magnetic field, and to not induce RF Noise into the conductors.
Refund Policy
EXCHANGE
Every product that you order from Radar Audio Company online shop is taking full care by us. You may return any items in its original condition for an exchange due to below reasons:
- The goods received are not the ones that you ordered;
- If it is discovered that the product is severely damaged or has operation problems after opening or when it remained unopened.
- Customer must contact our Customer Service Department within seven working days of receipt of the goods for replacement.
- The goods must be accompanied with our official invoice, original package, product barcode, accessories, manuals and warranty card without filled.
- All exchanged products will be inspected by our service center before replacement. Otherwise, we will not be able to identify and process the replacement procedure.
- The returned product must be intact, not involving human damage, not being repaired, free from scratches and water damage.
NOT APPLICABLE FOR EXCHANGE
- Invalid product code and serial number of the product and warranty card.
- Product not sold on Radar Audio online shop.
- Failure to follow instructions supplied with the product.
- Any damages or defects caused by, including but not limited to external pressure, impact damage, dropped, misuse, humidity, water damage, other consequences of easy access, or missing parts.
- Any damages or defects that occur in/on outer surface of the product that result from normal wear and tear under ordinary use.
- Any damages or defects caused by human errors or unexpected factors including but not limited to handling, extrusion, bumps, scratches, impacts, exposure to high temperature, improper input voltage, corrosion, water, fire, accidents etc.
- Any damages or defects caused by any accident, act of natural, physical damage or malfunction, abuse, misuse, natural or personal disaster, or any unauthorized disassembly, repair or alteration and modification.
REFUND
- In case of out of stock, refund will take 3-7 working days to process.
- Prices are subject to change without prior notice and all orders are subject to Company’s acceptance at its sole discretion and stock availability.
- If any dispute arises, Radar Audio Company determination shall be final.
- Where these terms and conditions are available in Chinese, the English version is the governing version and shall prevail whenever there is a discrepancy between the two versions.
QUESTIONS
- Email service@radaraudio.com
- Phone +852 2418 2668