A19 Integrated stereo amplifier
The amplifier's design and performance have been refined and tuned to an exquisite degree. This focus on sound quality has led to an intelligent power supply design that also enables the amplifier to offer a flexible upgrade path. The power section of the A19 is design to be able to supply two of Arcam's class-leading r-Series products in addition to its main duties. This allows the A19 to become a digital hub for a whole range of digital connection upgrades that includes both wireless Bluetooth® devices and USB sources.
While the world of music is increasingly a digital one, analogue sources are not forgotten. The continued popularity of vinyl has led Arcam to to equip the A19 with a new ultra-low noise moving magnet (MM) phono stage that allows the music enthusiast to enjoy their vinyl collection afresh. While the use of high performance headphones has grown dramatically of late, little effort has been made to improve the headphone sections of the amplifiers that drive them. The A19 addresses this by employing a completely new circuit that can deliver a level of sound quality that will thrill even the most demanding listener.
The A19 is built to the same very high standards as the company's other FMJ series products. Arcam engineers have chosen every critical component using careful measurement and years of design experience. These audiophile grade components are designed into a circuit layout configuration that has been carefully optimised for the very best performance. The A19's audio circuits are combined with an ultra-low noise power supply built around a muscular toroidal transformer. These state-of-the-art electronics are encased in a resonance damped chassis which exudes quality and perfectly matches the sound quality of this outstanding Arcam amplifier. The A19 is designed in the UK and available in a discrete black finish.
General
- Mains voltage: 110–120V~ or 220–240V~
- Power consumption (maximum): 350W
- Dimensions W x D x H (including feet): 433 x 275 x 85mm
- Weight (net): 8.5kg Weight (packed): 10.2kg
- Supplied accessories: Mains lead, CR108 remote control, 2 x AAA batteries, Accessory power cable
Technical Specifications
- Continuous power output (20Hz—20kHz at 0.5% THD), per channel
- Both channels, 8Ω, 20Hz—20kHz: 50W
- Single channel, 4Ω, at 1kHz: 90W
- Harmonic distortion, 80% power, 8Ω at 1kHz: 0.003%
- Inputs：Phono (MM) cartridge Input sensitivity at 1kHz: 5mV
- Input impedance: 47kΩ + 100pF
- Frequency response (ref. RIAA curve): 20Hz—20kHz ± 1dB
- Signal/noise ratio (Awtd) 50W, ref. 5mV input: 80dB
- Overload margin, 50mV at 1kHz: 20dB
- Inputs：Line and AV inputs
- Nominal sensitivity: 1V Input impedance: 10kΩ
- Maximum input: 4.6Vrms
- Frequency response: 20Hz—20kHz ± 0.2dB
- Signal/noise ratio (Awtd) 50W, ref. 1V input: 105dB
Inputs Phono (MM) cartridge
- Input sensitivity at 1kHz: 5mV
- Input impedance: 47kΩ + 100pF
- Frequency response (ref. RIAA curve): 20Hz—20kHz ± 1dB
- Signal/noise ratio (Awtd) 50W, ref. 5mV input: 80dB
- Overload margin, 50mV at 1kHz: 20dB
Line and AV inputs
- Nominal sensitivity: 1V
- Input impedance: 10kΩ
- Maximum input: 4.6Vrms
- Frequency response: 20Hz—20kHz ± 0.2dB
- Signal/noise ratio (Awtd) 50W, ref. 1V input: 105dB
Outputs
- Preamplifier output
- Nominal output level: 630mV
- Output impedance: 230Ω
- Headphones Output
- Maximum output level into 600Ω: 4V
- Output impedance: 1ohm Load range: 16Ω—2kΩ
- Accessory power output
- Using accessory power cable supplied, provides two 2.1mm DC connectors: 6V, 1A
Refund Policy
EXCHANGE
Every product that you order from Radar Audio Company online shop is taking full care by us. You may return any items in its original condition for an exchange due to below reasons:
- The goods received are not the ones that you ordered;
- If it is discovered that the product is severely damaged or has operation problems after opening or when it remained unopened.
- Customer must contact our Customer Service Department within seven working days of receipt of the goods for replacement.
- The goods must be accompanied with our official invoice, original package, product barcode, accessories, manuals and warranty card without filled.
- All exchanged products will be inspected by our service center before replacement. Otherwise, we will not be able to identify and process the replacement procedure.
- The returned product must be intact, not involving human damage, not being repaired, free from scratches and water damage.
NOT APPLICABLE FOR EXCHANGE
- Invalid product code and serial number of the product and warranty card.
- Product not sold on Radar Audio online shop.
- Failure to follow instructions supplied with the product.
- Any damages or defects caused by, including but not limited to external pressure, impact damage, dropped, misuse, humidity, water damage, other consequences of easy access, or missing parts.
- Any damages or defects that occur in/on outer surface of the product that result from normal wear and tear under ordinary use.
- Any damages or defects caused by human errors or unexpected factors including but not limited to handling, extrusion, bumps, scratches, impacts, exposure to high temperature, improper input voltage, corrosion, water, fire, accidents etc.
- Any damages or defects caused by any accident, act of natural, physical damage or malfunction, abuse, misuse, natural or personal disaster, or any unauthorized disassembly, repair or alteration and modification.
REFUND
- In case of out of stock, refund will take 3-7 working days to process.
- Prices are subject to change without prior notice and all orders are subject to Company’s acceptance at its sole discretion and stock availability.
- If any dispute arises, Radar Audio Company determination shall be final.
- Where these terms and conditions are available in Chinese, the English version is the governing version and shall prevail whenever there is a discrepancy between the two versions.
QUESTIONS
- Email service@radaraudio.com
- Phone +852 2418 2668